4 setup wizard – Intellinet Network Solutions 509077 User Manual
Page 31
computer and the all-in-one printer are connected.
ready: The printer is not connected to a user and is ready to use.
off line: The printer is not connected to the MFP server through a USB cable, or
it is turned off.
Paper out: The printer is not connected to a user and is out of paper.
5.3.3 tcP/iP Status
This screen lists all TCP/IP settings of the MFP server, including the IP address,
subnet mask and gateway. It also can tell whether the dHCP server is on or off.
5.4 Setup Wizard
NOTE: You can configure the MFP server from the Setup Wizard. For the changes
to take effect, click “Save Settings” in the menu on the left to reboot the MFP server.
5.4.1 System
5.4.1.1 general Settings
You can change the MFP server name and port name on this screen.
1
WEB MANAGEMENT