Intellinet Network Solutions 509077 - Manual (Page 5)

different power adapter could damage the MFP server.
• do not handle plugs with wet hands. doing so may result in electric shock.
• Do not use damaged power cords. Doing so may result in electric shock or fire.
observe the following when handling power cords:
• do not modify power cords.
• do not place heavy objects on power cords.
• do not sharply bend, twist or pull on power cords.
• do not route power cords near heating equipment.
• do not attempt to repair the power adapter or cord. Contact your vendor to order
a new one.
• Handle power plugs with care. Improper handling may result in fire. Observe the
following when handling power plugs:
• do not plug in power plugs that are dusty or dirty.
• Firmly plug in power plugs all the way.
• Periodically remove power plugs from the outlet and clean the base of the plug.
If power plugs are left plugged into an outlet for long periods, dust may
accumulate near the base, posing a risk of short-circuiting and fire.
• To ensure safety, always unplug the power adapter from the outlet when the
product will not be used for an extended period.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or trip over
them.
• Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
• do not expose the device to dampness, dust or corrosive liquids.
• discontinue use if a foreign object or water or other liquid enters the product.
Continued use may result in electric shock or fire. Immediately remove the
power adapter from the outlet and then contact your vendor.
5
SAFETY & COMPLIANCE