Intellinet Network Solutions 509077 - Manual (Page 44)

14. You have successfully added the network printer to the PC. The information for
the printer is displayed on the screen. Click “Finish.”
NOTE: In Windows Vista, you need to close the “Bi-directional” function for
better compatibility with some printers. on the desktop, go to Start and Settings,
then select “Printers.” on the Printers screen, right-click the printer and select
“Properties.” on the Properties screen, disable the bi-directional support.
7. raW Printing
RAW printing allows users to connect to printers via TCP/IP for print sharing. A
computer with a Windows 2000/XP/Server 200 operating system can use the
protocol to share printing on the network. The MFP server can support RAW
printing by default.
To configure the RAW setting in Windows 2000/XP/Server 2003, follow the steps
below. Note that the following procedures and screen samples are representative
of Windows XP. For Windows 2000/Server 200, the procedures are similar.
1. on the desktop, go to Start, then Settings. Select “Printers and Faxes.”
2. Click “Add a Printer.”
44
RAW PRINTING