Intellinet Network Solutions 509077 - Manual (Page 14)

3.3 Auto connect list
To let the system occupy the MFP server automatically when you want to print a
document, you can add the all-in-one printer to your Auto Connect list. The system
will send the printing jobs to the all-in-one printer when the MFP server is idle and
is not being connected.
When you install the all-in-one printer, the MFP server automatically enables the
settings.
NOTE: If you’ve sent a printing job to the all-in-one printer while it’s connecting to
another user, you may be prompted that the device is not found or the document
failed to print. Follow the prompt to re-try, and the printer will queue your printing
job in your computer spooler. The MFP server will then print the job after the all-in-
one printer is idle or disconnected.
To add the all-in-one printer to the Auto Connect list, follow the steps below.
1. Click “Add” on the Auto Connect list screen.
14
MFP MANAGER