4 system menu, System menu – Infinity DMC 1000 User Manual
Page 120
120
DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 12 - Side panel menu
12.4 System menu
UB6
0..F (0)
Sets a value for user bit 6.
0
Prod
UB7
0..F (0)
Sets a value for user bit 7.
0
Prod
UB8
0..F (0)
Sets a value for user bit 8.
0
Prod
setup
input type
DVITC, LTC
Selects timecode type to be used for the
input:
DVITC = Digital Vertical Interval Time Code;
LTC = Linear Time Code.
0
Prod
f-run sync
Real time, Local value,
External
Selects type of timecode synchronisation.
0
Prod
ATC SD
11..18 (11)
Selects the video line number used to embed
the ATC (Ancillary Time Code) into the SD
video signal.
0
Prod
dropframe
NDF, DF
Selects non drop frame (NDF) mode or drop
from (DF) for timecode.
0
Prod
ATC HD
NONE, 9
Selects the video line number used to embed
the ATC (Ancillary Time Code) into the HD
video signal.
0
Prod
play mode
Regenerated, From file
Sets the playback mode of the timecode
generator.
0
Prod
new timecode
hrs
0..24 (0)
Sets value for hours.
0
Prod
min
0..59 (0)
Sets value for minutes.
0
Prod
sec
0..59 (0)
Sets value for seconds.
0
Prod
frms
0..29 (0)
Sets value for frames.
0
Prod
recbuff
preferred media
Not Active
Order of preferred media when the camcorder
switches media during recording.
0
Prod
metadata
storyfile
<no story>, <list of story
file names>
Selects story file name used in the system.
0
-
Menu item
Values
Description
Level File
Menu item
Values
Description
Level File
hardware
viewfinder
VF monitoring
Y, R, G, B, x-G
Selects type of signal to view in viewfinder:
Y = luminance signal;
R,G,B = red, green or blue channel;
x-G = inverted green channel
2
Oper
detail