Infinity DMC 1000 - Manual (Page 73)

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 73
Chapter 5 - Video setup
5.9 Exposure time
The exposure time values of 1/200, 1/500, 1/1000 and 1/2000 of a second are used to capture
fast moving objects so that these can be played back sharply in slow motion. The value
selected depends on the speed of the moving object.
Press the momentary up/down Exp. Time switch to select an exposure time. When VAR is
selected, use the front rotary control to adjust the value. The value can be adjusted as long as
the value text is visible. The variable exposure time value is saved under the VAR setting.
☞
Note
If an exposure time other than nominal is selected, the non-standard indicator (!) in the
viewfinder lights.
Lighting
The exposure selection also includes lighting control positions which can be used when
shooting with lighting that is operating at a different frequency than the camcorder. There are
two positions; 50 Hz and 60 Hz. These positions can be varied in a range from -10 to +10.
To reduce flicker select the frequency closest to the frequency of the lights and then vary the
lighting control in the VIDEO/LEVELS/EXPOSURE/LIGHTING menu to obtain the best result.
☞
Note
Increasing the exposure speed lowers the camcorder sensitivity proportionally.
Select Rec
Audio Level
Exp.
Time
Auto
White
Exposure time
switch
Front rotary
control
Value Function
Nom nominal setting
50 Hz shooting with 50Hz lighting (adjustable)
60 Hz shooting with 60Hz lighting (adjustable)
1/200 for fast moving objects
1/500 for fast moving objects
1/1000 for fast moving objects
1/2000 for fast moving objects
VAR enables the exposure to be varied - use the front rotary control to adjust the value