Infinity DMC 1000 - Manual (Page 132)

132 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 13 - Viewfinder menu
13.3 Setup menu
Menu item Values Description Level File
Formats 0
Video standard 1080i50,720p50,576i50,
1080i59,720p59,480i59
Selects camera video standard. 0 Prod
Video source CAM, SDI, CVBS Selects recording source:
CAM = camera;
SDI = digital video input;
CVBS = analog video input. 0 Prod
Compress HD JP2K50, JP2K75,
JP2K100, (MP2I60),
(MP2I80) Selects video compression and bitrate for HD
recording. MPEG2 compression is optional. 0 Prod
Compress SD DV25, JP2K30, JP2K40,
JP2K50, (MP2I30),
(MP2I40), (MP2I50) Selects video compression and bitrate for SD
recording. MPEG2 compression is optional. 0 Prod
media selection REV, CF1, CF2, Extern Selects the storage media for recording
multimedia data. 0 Prod
Chunk size NoLimit, 10 sec., 30 sec.,
60 sec., 2 GB Sets the chunk size for the mediafile.
(NoLimit is not available when CF1 or CF2 is
selected.) 3 Prod
VF playback Conf, Full Sets the way content is displayed in the
viewfinder:
Conf = as is (‘confidence’);
Full = maximized crop. 0 Prod
Aspect Ratio 16:9, 4:3, LB Sets aspect ratio of the recorded signal (only
available when an SD video standard is
selected) 0 Prod
Timecode 0
Run mode Record-run > Free-run Sets the run mode of the timecode generator:
Record-run = timecode generator only runs
when recording.
Free-run = timecode generator runs
continuously. 0 Prod
FRun set 0
FRun mode 0 Prod
Output TC type DVITC, LTC Selects timecode type to be used for the
output:
LTC = Lineair timecode;
DVITC = Digital Vertical Interval Timecode
(from SDI) 0 Prod
Input TC type DVITC, LTC Selects timecode type to be used for the
input:
LTC = Lineair timecode;
DVITC = Digital Vertical Interval Timecode
(from SDI) 0 Prod
Drop frame NDF, DF Selects drop frame or non drop frame mode
(in 59.94 modes) 0 Prod
New timecode
Hours 0..24 Sets value for hours. 0
Minutes 0..59 Sets value for minutes. 0