Infinity DMC 1000 - Manual (Page 66)

66 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 5 - Video setup
5.4 Standard video settings
To ensure that some of the camcorder functions are not set to unusual values, a standard file
has been defined that contains the default values for most video functions. To recall the
standard values for the various video functions:
➢ Press the Std. recall button on the left side of the camcorder and hold it for a few
seconds. The message “Standard recall completed” appears in the viewfinder.
☞
Note
The standard values only take effect when the camcorder is not recording.
The non-standard indicator (!) in the viewfinder lights when the video settings are not set to
their standard value, for example, when exposure is not set to nominal. It also lights when
black stretch or extended auto iris is on and if AWC or FL50 or FL60 is selected with the white
balance switch.
Operate Gain Output White Bal
User 1 User 2
Monitor
Warning
Save
Std.
Recall
Marker
Stby +
-
Cam
Bars
Clear
ND 1/4
ND 1/16
ND 1/64 1
2
3
4
+
-
Contrast
Standard recall button