Infinity DMC 1000 - Manual (Page 88)

88 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 7 - Recording setup
Compression schemes
The recording compression defines the type of compression that is used to record the video
signal. The available compression schemes and bit rates depend on the recording video
standard that has been selected.
* only available when the optional DMC1120 MPEG2 board is installed.
7.1.1 Recording from external inputs
To record from an external video signal make sure the video standard and type (SDI or CVBS)
match the provided signal. The external video signal is displayed both in the viewfinder and on
the side panel display.
☞
Note
When the camcorder settings do not match the external signal a message is shown
(“Incompatible video standard”).
☞
Note
When CVBS is selected as a video source make sure that the analog input is set to CVBS in the
SYSTEM/HARDWARE/PORTS/ANALOG INPUT
menu.
Video standard Compression Available bit rates Indication
HD 1080i50, 720p50,
1080i59, 720p59 JPEG2000 50 Mb/s, 75 Mb/s, 100 Mb/s JP2K
MPEG2-I * 60 Mb/s, 80 Mb/s MP2I
SD 576i50, 480i59 DV25 25 Mb/s DV25
JPEG2000 30 Mb/s, 40 Mb/s, 50 Mb/s JP2K
MPEG2-I * 30 Mb/s, 40 Mb/s, 50 Mb/s MP2I
Port Video source Video standards
Digital Input SDI 720p50, 720p59.94, 1080i50 or 1080i59.94
Analog Input CVBS 576i50 or 480i59.94