Infinity DMC 1000 - Manual (Page 21)

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 21
Chapter 2 - Attaching parts
Chapter 2
Attaching parts
2.1 Mounting a lens
Attach a lens to the camcorder as follows:
Caution
Do not attach a lens weighing more than 5 kg (11 lbs) to the camcorder without a support.
1. Ensure that the lens locking ring is in the unlocked position - turned counterclockwise
as seen from camcorder front.
2. Remove dust protection cap .
3. Hold the lens so that the positioning pin aligns with the notch of the lens mount. Fit the
lens into the lens mount and hold it in place.
4. Turn the lens locking ring clockwise to lock the lens in place.
5. Connect the lens cable to the lens connector at the right side of the camcorder.
6. Place the lens cable into the bottom clip at the front of the camcorder and the clip located
at the side.
1 2
3