Infinity DMC 1000 - Manual (Page 139)

DMC 1000 Digital Media Camcorder User’s Guide (v1.15) 139
Chapter 13 - Viewfinder menu
Momentary iris 3
Momentary iris On > Off Turns momentary iris on or off. 3
Setpoint 0..99 (8) Sets momentary iris setpoint level. 3
Auto iris 3
Auto Iris On > Off Turns auto iris on or off. 3 Oper
Peak/Average 0..99 (78) Sets the balance between peak and average
video level. 3 Oper
Setpoint 0..99 (20) Sets auto iris exposure level. 3 Oper
Gain 5..10 (5) Sets auto iris response speed. Lower values
give slower speed. 3 Oper
Threshold 0..99 (63) Sets the threshold value for the auto iris
function 3 Oper
Extended auto iris
Ext. auto iris On, Off Turns extended auto iris on or off. This
function automatically regulates the video
level by adjusting iris and gain to suit the
ambient lighting conditions. 3 Prod
Gain speed 1..5 (5) Sets the gain speed for extended auto iris. S1 Oper
Minimum iris F5.6, F8, F11, F16 Sets the minimum iris value for extended auto
iris. 3 Oper
Maximum iris F1.4, F2.0, F2.8, F4.0,
F5.6 Sets the maximum iris value for extended
auto iris. 3 Oper
Max (dB) 0..15 dB (9 dB) Sets the maximum gain value for extended
auto iris. 3 Oper
Gain presets 2
Preset - -6dB, -3dB Selects gain value for - preset. 2
Preset + +6dB, +9dB, +12dB,
+18dB Selects gain value for + preset. 2
Preset ++ +9dB, +12dB, +18dB,
+24dB Select sgain value for ++ preset. 2
Preset +++ +30dB, +36dB, 42dB Selects gain value for +++ preset. 2
Tally 0
Rear follow On > Off Turns the rear tally follow mode on or off.
When follow mode is on the rear indicators
follow the tally on/off switch on the
viewfinder. 0
Service S1
Sens. cal Off, On Runs sensor calibration. S1
3200K cal Off, Run Runs 3200K calibration. S1
3200K reset Exec Resets 3200K calibration value to the factory
default. S1
Test patterns 3
Sawtooth 3
Sawtooth Off, On Turns sawtooth test signal on or off. 3
Viewfinder menu item Values Description Level File