Infinity DMC 1000 - Manual (Page 84)

84 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 6 - Audio setup
6.4 Audio monitoring
The camcorder has a built-in monitor speaker on the left side panel. You can monitor the
live audio on this speaker. Alternatively, plug a headphone into the 6.3 mm jack at the rear
of the camcorder to monitor the audio. Adjust the volume of the speaker or the
headphone with the monitoring volume control.
To select an audio source to monitor with the headphones:
1. Go to the AUDIO/MONITORING menu.
2. Tap the HDPH MODE LEFT or HDPH MODE RIGHT button and use the arrows in the pop-
up box to select Source or Channel mode.
3. Tap the HDPH SOURCE LEFT or HDPH CHANNEL LEFT buttons to select the recording
channel or input source to monitor on the left headphone speaker.
4. Tap the HDPH SOURCE RIGHT or HDPH CHANNEL RIGHT buttons to select the
recording channel or input source to monitor on the right headphone speaker.
To select an audio source to monitor on the speaker:
1. Go to the AUDIO/MONITORING menu.
2. Tap the SPEAKER MODE button and use the arrows in the pop-up box to select one of the
headphone follow modes.
Audio Out 11-17V 7A
11-17V
1A max.
Audio
In 1
Mic Line +48V
In 2
Mic Line +48V
Operate Gain Output
Pow
e r
White Bal.
User 1 User 2
Monitor
Warning
Save
Std.
Recall
Marker
Stby +
-
Cam
Bars
Clear
ND 1/4
ND 1/16
ND 1/64 1
2
3
4
+
-
Contrast
Monitoring
volume control
Headphones
output
Built-in
speaker