Infinity DMC 1000 - Manual (Page 38)

38 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 3 - General set-up
3.3.3 Carrying handle
3.4 Lens preferences
When you connect a lens to the camcorder you may need to adjust the back focus. Refer to
the lens manufacturer's instructions to find out how to do this. The SYSTEM/HARDWARE/LENS
menu allows you to choose and, if necessary, adjust other parameters to suit your lens type
and your personal preferences.
Lens type
In the SYSTEM/HARDWARE/LENS menu, select the lens type from two predefined settings;
standard (Std) or wide angle (WA). This gives you the optimum shading settings for either a
standard or wide angle lens.
Auto iris
If required, switch on the auto iris function in the SYSTEM/HARDWARE/LENS menu. In this
menu, you can also set the parameters associated with the auto and the momentary iris.
Lens indicators
The ND/RE indicator in the viewfinder lights when a lens range extender is selected or an ND
filter is applied.
The Iris indicator in the viewfinder shows the value of the iris opening (when enabled in the VF
submenu of the viewfinder menu).
The Zoom indicator in the viewfinder shows the degree to which the lens has been zoomed
out or in ranging from 0 (wide angle) to 99 (tele). It shows 50 if the lens does not support this
feature.
Location Control Possible assignments
Zoom control
(only available
with digital
lenses) • Disabled - default
• Enabled
Record switch • Disabled - default
• Enabled
Record
Zoom