JVC HR-XVS20EK - Manual (Page 32)

Filename [XVS20EK_07S-VHS.fm]
Masterpage:Left+
32
Page 32 April 1, 2003 2:54 pm
OPERATIONS ON S-VHS DECK (cont.)
VIDEO Plus+
®
Timer
Programming
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
B
Access the VIDEO Plus+ screen.
The front display panel looks like this:
C
Enter the PlusCode number.
The PlusCode number you enter appears on the front display
panel with only a 4-digit number:
D
Access the VIDEO Plus+ Program screen.
The front display panel shows the programme number. Pressing
" changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
● If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid PlusCode number.
Before performing the VIDEO Plus+ Timer
Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/S-VHS/DVD switch to the right.
Press PROG.
Press the number keys to
enter the PlusCode number
of a programme you wish to
record.
● If you make a mistake, press &
and input the correct number.
Press OK, then the VIDEO
Plus+ Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or “TV PROG” shows “– –”, press PR +/– to
input the channel position number on which your unit
receives the station, then press OK or
e.
XVS20EK_07S-VHS.fm Page 32 Tuesday, April 1, 2003 2:55 PM