JVC HR-XVS20EK - Manual (Page 58)

Filename [XVS20EK_08DVD.fm]
Masterpage:Left+
58
Page 58 March 28, 2003 6:55 pm
OPERATIONS ON DVD DECK (cont.)
Playback Features
with Play Set Up
menu
Programme Playback
You can play back groups on an MP3 disc in the desired order.
A
Access the Play Set Up menu.
Press REPEAT in stop mode.
B
Select the mode.
C
Select the groups in the desired order.
If you have specified a wrong selection
Press 8. The last selection programmed is erased.
D
Start playback.
Press 4. Playback starts in the selected order.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
● To clear the Play Set Up menu, press REPEAT.
● To stop Programme Playback, press 8.
● To cancel programming, press 8 in stop mode.
● You can also quit Programme Playback in the following cases:
• Press x to open the disc tray.
• Turn on the unit.
NOTES:
● You cannot play back tracks in a group in the desired order.
● By pressing REPEAT during Program Playback to display the
program table on the TV screen, the program number
currently being playback is displayed in yellow.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
Press w e to move the arrow
to “PROGRAM”, then press
OK.
● The programme table appears
under the Play Set Up menu.
Press the appropriate number
keys to select the group.
● Refer to “Track/group
selection” on page 57.
● Up to 18 groups can be
programmed.
● You may select the same group
more than once.
The programmed order number
is shown under each program
number.
XVS20EK_01.book Page 58 Friday, March 28, 2003 7:00 PM