JVC HR-XVS20EK - Manual (Page 64)

Filename [XVS20EK_09Editing.fm]
Masterpage:Left+
64
Page 64 March 28, 2003 6:55 pm
EDITING (S-VHS DECK) (cont.)
Dubbing
(from DVD to S-VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
A
Load a cassette and place a disc.
For the S-VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
B
Prepare the S-VHS deck for dubbing.
A Press S-VHS.
B Press
p
to select recording speed.
C Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
C
Prepare the DVD deck for dubbing.
A Press DVD.
B Search for the point where you want to start dubbing
by pressing 4, 5 or 3.
C Press 9 to pause playback a little before the start
point.
D Press and hold 7, then press 9.
● “dub” blinks on the front display panel.
D
Start dubbing.
Press 4 to start playback.
E
End dubbing.
Press 8.
NOTES:
● Set “ON SCREEN GUIDE” to “OFF” ( ੬
pg. 77) if you do not
want to record the on-screen display for DVD discs during
dubbing.
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
XVS20EK_01.book Page 64 Friday, March 28, 2003 7:00 PM