View the confirmation screen, Return to the normal screen, Important – JVC HR-XVS20EK User Manual

Page 79

Advertising
background image

Masterpage:Right-No-Heading

79

Filename [XVS20EK_10Subsidiary.fm]

Page 79

April 1, 2003 3:12 pm

NOTES:

● Fine tuning is performed automatically during Auto Channel

Set. If you want to perform tuning manually, refer to page 83.

● If you perform Auto Channel Set when the aerial cable is not

connected properly, “SCAN COMPLETED –NO SIGNAL–”
appears on the TV screen in step

E. When this happens, make

sure of the aerial connection and press OK; Auto Channel Set
will take place again.

E

View the Confirmation screen.

After “SCAN COMPLETED” is
displayed on the TV screen for
about 5 seconds, the
Confirmation screen looking
like the one to the right
appears. The stations your unit
located appear on a
Confirmation screen —
channel positions (PR),
channels (CH) and station names (ID

pg. 84). The

blueback screen and the programme currently being
broadcast by the blinking station appear alternately for 8
seconds each. To view the next page, use the

rt w e

button on the remote control.

● The Guide Program numbers will also be set automatically

during Auto Channel Set.

F

Return to the normal screen.

Press SET UP MENU.

● Using the Confirmation screen, you can skip or add channel

positions, enter station names and perform other operations.
Refer to pages 80 – 83 for the procedures.

● Depending on reception conditions, the stations may not be

stored in order, and the station names may not be stored
correctly.

IMPORTANT

● In certain reception conditions, station names may not be

stored correctly, and Auto Guide Program Number Set may
not work properly. If the Guide Program numbers are not
set properly when you timer-record a TV programme using
the VIDEO Plus+ system, the unit will record a TV
programme of a different station. When programming the
timer using the VIDEO Plus+ system, be sure to check the
desired channel is selected correctly. (

pg. 32, “VIDEO

Plus+

®

Timer Programming”) (S-VHS deck only)

● Your unit memorizes all detected stations even if reception

of some of them is poor. You can delete those stations with
an unacceptable picture. (

pg. 81, “Delete A Channel”)

XVS20EK_10Subsidiary.fm Page 79 Tuesday, April 1, 2003 3:12 PM

Advertising