JVC HR-XVS20EK - Manual (Page 49)

Masterpage:Right-No-Heading
49
Filename [XVS20EK_08DVD.fm]
Page 49 March 28, 2003 6:55 pm
A-B Repeat Playback
You can repeat the desired part.
A
Access the Play Set Up menu.
Press REPEAT during playback of the item you want to
repeat.
B
Select the mode.
C
Set the “A” (start) point.
D
Set the “B” (end) point.
● To clear the Play Set Up menu, press REPEAT.
● To stop A-B Repeat Playback, press 8.
● You can also stop Repeat Playback by pressing OK, or pressing
2 or 6.
NOTES:
● A-B Repeat Playback may not work properly depending on the
type of disc being used.
● The subtitles recorded around A-B point may not appear.
● The end of the item will be set as “B” point if the end of the
item reached before you set the “B” point.
Chapter Search
You can start playback the desired chapter.
A
Access the Play Set Up menu.
Press REPEAT during playback.
B
Select the mode.
Press w e to move the arrow to “CHAP. SEARCH”, then
press OK.
C
Select the chapter.
If you have specified a wrong selection
Press the appropriate number keys again.
● To clear the Play Set Up menu, press REPEAT.
NOTES:
● When “X” is displayed on the TV screen in step C, the
chapter you have selected is not contained in the disc, or
chapter search does not work on the disc.
● Chapter Search starts automatically when you select the
desired chapter in step C depending on the disc.
Press w e to move the arrow
to “A-B REPEAT”, then press
OK.
Press OK at the point where
you want the Repeat
Playback to start.
Press OK again at the point
where you want the Repeat
Playback to end.
The unit locates “A” point
and repeats playback
between “A” and “B” point.
A point
B point
Press the appropriate number
keys to select the desired
chapter, then press OK.
The unit starts playback from
the selected chapter.
● If you have selected a wrong
selection, press &, then select
the correct number again.
Examples:
To select track 5, press the number key “5”.
To select track 15, press the number key “1” and “5”.
To select track 25, press number key “2” twice, then “5”.
● It is not possible to use the number key “+10”.
XVS20EK_01.book Page 49 Friday, March 28, 2003 7:00 PM