Common operations, Turning on or off the power, Setting the clock – JVC CA-MXDVA9 User Manual

Page 14: Setting the am tuner interval spacing

Advertising
background image

– 11 –

Common Operations

Turning On or Off the Power

To turn on the unit, press
STANDBY/ON

so that the

STANDBY lamp goes off.

To turn off the unit (on standby), press
STANDBY/ON

again so that the

STANDBY lamp lights up.

• A little power is always consumed even while the unit is on

standby.

To switch off the power supply completely, unplug the AC
power cord from the AC outlet.

When you unplug the AC power cord or if a power
failure occurs

The clock is reset to “0:00” right away, while the tuner preset
stations (see page 15) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built
in this unit. You can set the clock whether the unit is on or
off.

On the unit ONLY:

1

Press CLOCK/TIMER.

The hour digits start flashing on the display.

2

Turn

4 / ¢ to adjust the

hour, then press SET.

The minute digits start flashing on
the display.

• If you want to correct the hour after

pressing SET, press
CANCEL/DEMO.
The hour digits start flashing again.

3

Turn

4 / ¢ to adjust the minute, then

press SET.

DAILY

Canceled

ON TIME

(Daily timer setting)

ON TIME

(Recording

timer setting)

Clock

setting

(The hour digits

start flashing.)

REC

To check the clock time

Press and hold SET while playing any source.
• Pressing SET, the source indication appears again.

To adjust the clock again

If you have adjusted the clock before, you need to press
CLOCK/TIMER repeatedly until the clock setting mode is
selected.
• Each time you press the button, the clock/timer setting

modes change as follows:

When you unplug the AC power cord or if a power
failure occurs

The clock is reset to “0:00” right away. If this happens, set the clock
again.

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.

On the unit ONLY:

When shipped, the unit is set to 9 kHz spacing.

You can only change the AM tuner interval spacing while
tuning into an AM station. (See page 15.)

Press STANDBY/ON

while holding

down

7.

• Each time you press these buttons, the

AM tuner interval spacing alternates
between 9 kHz and 10 kHz.

STANDBY/ON

STANDBY

STANDBY/ON

STANDBY

STANDBY/ON

STANDBY

+

EN11-15.CA-MXDVB10,B9,A9_f

02.4.24, 9:41 AM

11

Advertising