JVC CA-MXDVA9 - Manual (Page 40)

– 37 –
Reserving Karaoke Songs
—Karaoke Program Play
You can determine the playback order of the titles or tracks
on the DVD/SVCD/VCD/CD player. You can program up
to 12 steps.
• You cannot use reserve function when a SVCD or VCD
with the PBC function is played back. Press
7 before
performing below procedure.
• When playing back a DVD, you can only reserve titles on
the disc.
On the remote control ONLY:
1
Press RESERVE while holding
down SHIFT.
The karaoke reserve screen appears on the
TV.
2
Press one of the disc number buttons (DVD 1,
DVD 2 or DVD 3) you want to program while
holding down SHIFT .
The selected disc number is shown on the TV screen.
3
Press the number buttons
to enter a title or track
number you want to
program.
The selected title or track number
is shown on the TV screen.
Ex.: To select number 5, press 5.
To select number 10, press 10.
To select number 20, press +10 then 10.
To select number 23, press +10, +10 then 3.
• PRGM indicator also flashes on the display.
4
To program another title or track from the
same disc, repeat step 3.
To program another title or track from a
different disc, repeat steps 2 and 3.
Each time you select a title or track, the program item is
added up to 12 steps.
1 2 3 4 5 6
+
5
Press V. MASK while
holding down SHIFT.
The karaoke ( ) indicator lights
up on the display.
6
Press DVD
3.
The titles and tracks are played in the order
you have programed.
• A title or track which has finished played
back is deleted from the reserved program.
The play is stops after playing back all reserved
program and the PRGM indicator goes from the display.
To modify the program
You can modify the program before or after playing.
To erase a reserved steps, press CANCEL while holding
down SHIFT.
• Each time you press the buttons, the last programmed step
is erased from the program.
To add steps in the reserve program before playing, press
Cursor
3 or 2 to move to a number you like to add, then
select the disc and title/track numbers by following steps 2
and 3 before or after playing.
To erase program completely before playing, press
CLEAR when the playback is stopped.
The program you have made will be also erased,
• when you remove all the discs, and then press DVD
3.
• when you unplug the AC power cord.
• when a power failure occurs.
To check the programed contents
Press RESERVE while holding down SHIFT. The programed
contents appear on the TV screen.
To erase the karaoke reserve screen, press RESERVE while
holding down SHIFT again. The program you have made is
memorized.
To exit from Karaoke Program play mode, press 7 and
then PROGRAM on the unit twice.
If you do not press DVD 3 in step 6,
The normal play continues.
+
+
Selected title or track number
Selected disc number
7 8 9 10 11 12
1 - 5 2-10 3 - 1 1 - 7 2-14 3-13
EN35-37.CA-MXDVB10,B9,A9_f 02.4.24, 9:45 AM 37