JVC CA-MXDVA9 - Manual (Page 29)

– 26 –
Playing at Random—Random Play
The titles and tracks of all loaded discs are played at random.
• When you use Random play for a SVCD or VCD with the
PBC function activated, the PBC function is turned off.
• Random Play cannot be used on some DVD discs.
On the unit:
1
Load discs.
• If the current playing source is not the DVD/SVCD/
VCD/CD player, press DVD 3¥8, then 7 before going
to the next step.
2
Press RANDOM so that “RANDOM”
appears on the display.
The RANDOM indicator also lights up on the
display.
3
Press one of the disc number
buttons (DVD1, DVD2 or
DVD3) you want to play first.
The titles and tracks are played from
the selected disc at random.
Random play ends when all the titles and tracks on the all
loaded discs are played once.
On the remote control:
1
Load discs.
2
Press one of the disc number buttons (DVD 1,
DVD 2 or DVD 3) while holding down SHIFT
to select the disc you want to play, then
7.
3
Press PLAY MODE.
The play mode screen appears on the TV.
4
Press CONTROL
+ or − to
move to “RANDOM,” then
press ENTER.
The titles and tracks are played from
the selected disc at random.
Random play ends when all the titles
and tracks on the all loaded discs are
played once.
• You cannot select “RANDOM” during Program play.
REPEAT PROGRAM RANDOM
To stop playing, press 7.
• Random play also stops when the disc tray currently played
is opened.
To exit from Random play mode when finished, press
RANDOM on the unit. Or perform steps 3 and 4 on the
remote control. Each time you press ENTER, the Random
play turns on and off.
To skip the currently playing title or track, turn 4 / ¢
to the right (or press ¢ on the remote control).
Even if you turn 4 / ¢ to the left or press 4 on
the remote control
It just goes back to the beginning of the current title or track, but
cannot go back to the previous titles or tracks.
To erase the play mode screen, press PLAY MODE.
Repeating Playback
Repeat Play
You can repeat a title, chapter or track.
• For DVD, to use Repeat play with Program play or
Random play, select Repeat play after starting Program
play or Random play .
• Repeat play cannot be used on some DVD discs.
• You can only use Repeat play on SVCD or VCD with the
PBC function deactivated. When you turn on the PBC
function after Repeat play, press REPEAT repeatedly until
the REPEAT indicators go off from the display.
On the remote control:
1
Press PLAY MODE before or
during play.
The play mode screen appears on the TV.
2
Press CONTROL
+ or − to
move to “REPEAT.”
• When DVD is a playing source,
“REPEAT” cannot be selected while
playing.
3
Press ENTER repeatedly to
select Repeat play mode you
want.
• Each time you press the button, the Repeat play mode
indication on the TV screen changes as follows:
REPEAT PROGRAM RANDOM
+
Ex.: When the playback is stopped.
Continued
EN24-27.CA-MXDVB10,B9,A9_f 02.4.24, 9:44 AM 26