JVC CA-MXDVA9 - Manual (Page 46)

– 43 –
Using the Parental Lock
Setting the Parental Lock Level
Using this function, you can restrict playback of DVD
containing violent scenes (and those not suitable for your
family members).
• This function is only possible for the DVDs containing
such rating level information—Level 1 (most restrictive) to
Level 8 (least restrictive).
On the remote control ONLY:
Before setting the parental lock, make sure that no disc is
loaded on the currently selected tray.
1
Press ENTER while holding
down
7.
PARENTAL LOCK screen appears.
• When you set the parental lock for the
first time, points “Country Code.”
(Go to step 3.)
• When you change the parental lock settings,
points “PASSWORD.”
2
Press the number buttons (0
– 9) to enter the current
password (4 digits), then
press ENTER.
moves to “Country Code.”
• If you enter a wrong password,
“WRONG! RETRY···” appears.
Enter correct password again.
3
Press Cursor
3 or 2 to
select a proper country code,
then press ENTER.
moves to “Set Level.”
• For each country code, see pages 53
and 54.
4
Press Cursor 3 or 2 to select a parental lock
level, then press ENTER.
moves to “PASSWORD.”
• Each time you press the button, the parental lock level
changes as follows. The playback of the software rated
the level you select or more restrictive is prohibited to
be played back.
• If you do not want to make any restriction, select “–.”
Country Code
Set Level
PASSWORD
A D
–
– – – –
EXIT
PRESS KEY ENTER
Temporary
Level Change ?
PASSWORD
YES
NO
– – – –
PRESS ENTER EXECUTIVE
This DISC can't play now!
1 2 3 4
8 7 6 5 –
Initial PARENTAL LOCK screen
5
Press the number buttons (0 – 9) to enter new
password (4 digits), then press ENTER.
moves to “EXIT.”
6
Press ENTER.
The parental lock level is set and
PARENTAL LOCK screen disappears
from the TV.
To exit from PARENTAL LOCK screen any time during
the above procedure, press ENTER while holding down
7.
If you do not enter new password
The setting you have done is not stored.
Unlocking the Parental Lock Temporarily
Some discs cannot be played back at all when the parental
lock is set. If you insert such a disc and try to play, the
following PARENTAL LOCK screen appears on the TV. You
can unlock the parental lock setting temporarily on this
screen.
On the remote control ONLY:
1
Press Cursor
5 or ∞ to select “YES,” then
press ENTER.
moves to “PASSWORD.”
• If you do not unlock the parental lock (do not see the
loaded DVD), move to “NO” for “Level Change ?”
by pressing Cursor 5 or ∞. PARENTAL LOCK screen
disappears.
2
Press the number buttons (0 – 9) to enter the
current password (4 digits).
• If you enter a wrong password, “WRONG! RETRY···”
appears. Enter correct password again.
3
Press ENTER.
The parental lock is temporarily unlocked and
PARENTAL LOCK screen disappears.
If you enter wrong password 3 times,
“WRONG! CAN’T CHANGE!” appears on the screen. moves
to “EXIT” and Cursor 5 and ∞ do not work.
When you forget your password, enter “8888.”
+
EN38-43.CA-MXDVB10,B9,A9_f 02.4.24, 9:46 AM 43