Janome 350E - Manual (Page 11)

9
z
x
c
v
b
q
w
e
Raising the Presser Foot
The presser foot lifter raises and lowers the presser
foot.
You can raise the presser foot about 6 mm (1/4") higher
than the normal up position by exerting more pressure
when lifting the presser foot lifter.
Threading the Machine
z Raise the presser foot lifter. Turn the handwheel
to bring the needle to its highest position. Draw
the thread around and under the thread guide
while holding the thread at the spool. Then draw
the thread down through the right channel of the
thread guide plate.
q Presser foot lifter
w Thread guide
x Firmly draw the thread around the thread guide
plate and up to the thread take-up lever.
e Thread guide plate
z
x