Janome 350E - Manual (Page 8)

6
q
w
e
r
q
w
q
w
e
Winding the Bobbin
Removing the bobbin
Slide the hook cover plate release button to the right,
and remove the hook cover plate. Lift out the bobbin
from the bobbin holder.
q Hook cover plate release button
w Hook cover plate
e Bobbin
Setting the spool of thread
Place the spool of thread on the spool pin with the
thread coming off the spool as shown. Attach the large
spool holder, and press it firmly against the spool of
thread.
NOTE:
Use the small spool holder to hold narrow or small
spools of thread.
q Large spool holder
w Small spool holder
Additional spool pin
Use the additional spool pin when you need to wind the
bobbin without unthreading the machine while working
on a sewing project.
Insert the additional spool pin into the spool stand then
into the hole besides the horizontal spool pin.
Place the felt on the spool pin and place a spool of
thread on it as shown.
q Additional spool pin
w Spool stand
e Hole
r Felt