Janome 350E - Manual (Page 19)

17
q
w
e
r
t
y
e
t
Setting the Fabric in an Embroidery Hoop
z Mark the centerlines on the right side of the
fabric with tailor’s chalk.
q Fabric
w Centerlines
x Loosen the hoop tightening screw of the outer
hoop and lay the fabric and the inner hoop over
the outer hoop.
Place the template over the fabric, matching
centerlines.
e Hoop tightening screw
r Inner hoop
t Template
c Set the inner hoop into the outer hoop and
tighten the hoop tightening screw.
y Outer hooop
v Remove the template.
NOTES:
When placing the fabric on the embroidery hoop,
place the outer hoop on a flat surface.
For thin and stretchy fabrics, use an adhesive type
stabilizer (iron-on type) on the wrong side of the
fabric. More than one layer of the stabilizer may be
required.
The Cloth Setter 10000 (optional Item) is very helpful
when setting a fabric to a hoop in the right position.
z
x
c
v