Janome 350E - Manual (Page 40)

38
Importing the designs in the Editing window.
Press the Built-in design, PC card or USB memory
tab in the editing window.
Press the desired Pattern selection key or enter
characters for monogramming.
The selected pattern will be displayed in the Editing
window.
Editing the Embroidery Designs
To select the pattern to edit, press the image of the
desired pattern on the Editing window. The pattern will
be framed when it is selected.
Moving the selected pattern
To move the embroidery pattern on the Editing window,
press and drag the pattern to a desired location with
your fingertip.
CAUTION:
Do not drag the pattern on the screen with a sharp
pointed object.
Mode
1 2 3 4
5 6 7 8
Built-in Designs
A Z
Hoop Size A(F): 126 X 110 mm
Mode Cancel OK
Edit
B: 140x200mm
Size
A Z
Edit
B: 140x200mm
Mode Cancel OK
Size
A Z
1/14