JVC DR-M10 - Manual (Page 102)

Filename [DR-M10U_11Subsidiary.fm]
Masterpage:Left+
102
EN
Page 102 January 16, 2004 7:25 pm
SUBSIDIARY SETTINGS (cont.)
Finalize a disc
Finalizing DVD-R/RW discs recorded on this unit makes it
possible for the discs to be played back on other DVD players.
DVD-RW discs are finalized in the mode that the discs were
formatted, enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (
੬
pg. 36, 76)
Before finalizing
● It is possible to record on a blank space.
● It is possible to enter a program title. ( ੬
pg. 76, “Modify
Program Name”)
● It is possible to delete programs. ( ੬
pg. 77, “Delete
program”)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a
recorded program is deleted from a DVD-R disc.
● It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalized.
After finalizing (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded
in conformity to the DVD Video standard, enabling you to
play back the discs as DVD VIDEO discs. (
੬
pg. 8, “Discs for
Playback Only”)
● Although DVD-R/RW discs finalized on this unit become
playable on DVD players compatible with DVD-R/RW discs,
some discs still may not play, for which JVC cannot take
responsibility.
● Marked points marked before finalizing will be deleted, and
programs will be divided automatically into “chapters”
approximately every 5 minutes. (
੬
pg. 38, “Marking
positions to play again later”)
● Depending on the DVD players and DVD-R/RW discs used,
and on the conditions of recording, it may not be possible to
play back the discs. In this case, play back the discs on this
unit.
● Additional recordings become impossible.
Finalize a DVD-R/RW disc
A
Finalize the disc.
A Press rt to select “FINALIZE”, then press ENTER.
Press w e to select “YES”, then press ENTER when
“DISC WILL BE FINALIZED” appears on the TV
screen.
B Press w e to select “OK”, then press ENTER when
“FINALIZING WILL MAKE DISC READ-ONLY”
appears on the TV screen.
B
Return to the normal screen.
Press SET UP.
● Menu screen is cleared.
● Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. Only display
for library appears.
● Once a DVD-RW (VR mode) disc has been finalized, it can be
played on DVD players compatible with VR mode.
Cancel the finalization of a DVD-RW
disc
A
Cancel the disc finalization.
A Press rt to select “CANCEL DISC FINALIZATION”,
then press ENTER.
B Press w e to select “OK”, then press ENTER when
“CANCEL DISC FINALIZATION” appears on the TV
screen.
B
Return to the normal screen.
Press SET UP.
● When the disc finalization is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(
੬
pg. 9, 101)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Load a DVD-R/RW disc to finalize.
Perform steps A to B of “Format a DVD-RAM disc”
(
੬
pg. 101) before continuing.
Load a DVD-RW disc to cancel the disc finalization, and
perform steps
A to B of “Format a DVD-RAM disc”
(
੬
pg. 101) before continuing.
DR-M10U_01.book Page 102 Friday, January 16, 2004 7:38 PM