Video in/out, Recording set, Pg. 98) for reco – JVC DR-M10 User Manual
Page 98: Enables reception of, Set to “off” in function set up menu, Pg. 98), 2” to “s-video, Video, Subsidiary settings (cont.)
Filename [DR-M10U_11Subsidiary.fm]
Masterpage:Left+
98
EN
Page 98
January 26, 2004 11:40 am
SUBSIDIARY SETTINGS (cont.)
VIDEO IN/OUT
(The boldface settings in the table below indicate the settings at your purchase.)
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8 FRONT AUX F-1
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (F-1) being used on
the front panel.
VIDEO
:
To use the VIDEO input connector on the front panel.
S-VIDEO
:
To use the S-VIDEO input connector on the front panel.
8 REAR AUX L-1
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (L-1) being used on
the rear panel.
VIDEO
:
To use the VIDEO input connector on the rear panel.
S-VIDEO
:
To use the S-VIDEO input connector on the rear panel.
8 REAR AUX L-2
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (L-2) being used on
the rear panel.
VIDEO
:
To use the VIDEO input connector on the rear panel.
S-VIDEO
:
To use the S-VIDEO input connector on the rear panel.
8 SAVE AS LIBRARY
OFF
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(
8 XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
You can select the audio format when you record a program in XP mode. When
this function is set to “LINEAR PCM”, you can obtain a high-quality audio
sound.
DOLBY DIGITAL
:
To record in Dolby Digital format.
LINEAR PCM
:
To record in Linear PCM format.
8 2ND AUDIO RECORD
ON
OFF
● When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R tracks. The main
audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/R tracks.
● When this function is set to “OFF”, the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
● The “MONO” indicator appears on the screen for about 5 seconds if the program is a
monoral broadcast.
● The “STEREO” indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
● Both “STEREO” and “SAP” indicators appear when a stereo program is accompanied
by SAP sound.
● Both “MONO” and “SAP” indicators appear when the main audio on the monoral
broadcast is accompanied by SAP sound.
DR-M10U_11Subsidiary.fm Page 98 Monday, January 26, 2004 11:40 AM