JVC DR-M10 - Manual (Page 52)

Filename [DR-M10U_07Playback.fm]
Masterpage:Left+
52
EN
Page 52 February 5, 2004 7:02 pm
PLAYBACK OPERATIONS (cont.)
Program Playback
You can play back up to 30 tracks in the desired order.
While stopped
1 Access Play Set Up Menu.
Press ON SCREEN twice.
2 Select the menu item.
Press w e to select “PRGM”, then press ENTER.
● The program table appears under Play Set Up Menu.
3 Select the tracks in the desired order.
Use number keys (1–9, 0) to enter the track numbers.
If you have specified a wrong selection
Press &. The last selection is erased.
Or press 8. The whole selection is erased.
4 Start playback.
Press 4. Playback starts in the programed order.
● When all of the programed tracks have been played back,
Program Playback stops, but the programed information
remains.
● To add tracks to the end of the program, perform steps 1
through 3.
● During Program Playback, pressing 6 skips to the next
selection of the program. Pressing 2 returns to the
beginning of the current selection.
To clear Play Set Up Menu and the contents of the
program from the screen
Press ON SCREEN.
To cancel Program Playback
Press w e to select “PRGM”, then press ENTER.
NOTE:
Program Playback is not possible depending on the type of disc.
Random Playback
You can play back all the tracks on the disc in random order.
While stopped
1 Access Play Set Up Menu.
Press ON SCREEN twice.
2 Select the menu item.
Press w e to select “RND”, then press ENTER.
● Playback starts in random order.
To clear Play Set Up Menu
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during
Random Playback.
Select the switching interval of the
slide show
You can control the switching interval of the slide show.
1 Access Play Set Up Menu.
Press ON SCREEN twice.
2 Select the menu item.
Press w e to select “ ”, then press ENTER.
● The pop-up window appears under the selected item.
3 Select the desired option.
Press rt to select the desired option, then press ENTER.
● Each time you press rt, the interval changes as follows:
5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. {
30 SEC. { (Back to the beginning)
Examples:
● To select track 5, press the number key “5” and ENTER.
● To select track 15, press the number key “1” and “5”.
● To select track 25, press the number key “2” and “5”.
DR-M10U_07Playback.fm Page 52 Thursday, February 5, 2004 7:02 PM