JVC CA-NXF30 - Manual (Page 11)

P
rep
ar
at
io
n
8
■ IMPORTANT
• Connect the main unit directly to a TV (or a
monitor) without routing through a video
cassette recorder (VCR) or an HDD/DVD
recorder. Otherwise picture distortion may occur
during playback. (Routing the connection
through a VCR or an HDD/DVD recorder,
however, does not affect the audio quality.)
• Connecting the main unit to a VCR-built-in-TV
may also cause picture distortion during
playback.
This system can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
NOTE
• The HDMI video signal type can be checked with
the “HDMI” indicator in the display window.
(Refer to “Selecting the video signal type” on
page 10.)
• If the picture is distorted while an HDMI TV is
connected, turn off the main unit and turn it on
again.
• A TV compatible with HDCP (High-Bandwidth
Digital Content Protection) can also be
connected to the [HDMI MONITOR OUT]
terminal, so that the uncompressed HD video
signal type can be output as well.
• This system is compatible with some basic
functions of HDMI CEC. (Refer to page 57.)
NOTE
• You can output the audio signal from the
[DIGITAL OUT] terminal when “DVD”, “USB” or
“DGTL IN” is selected as the source in the
display window.
• When “DGTL IN” is selected as the source in the
display window, digital audio from the
[DIGITAL OUT] terminal is decoded to a linear
PCM signal.
Main unit
Direct connection
TV (or monitor)
VCR
or HDD/DVD
recorder
Connecting a TV with the [HDMI
MONITOR OUT] terminal
Main unit
(rear view)
To an HDMI input terminal
HDMI cable (not supplied)
TV
Connecting external digital
audio devices
Output MD player or
satellite receiver
To an optical digital
output terminal
Optical digital cable
(not supplied)
Main unit
(rear view)
Input Output
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input AV amplifier with
a built-in decoder
NX-F30[U].book Page 8 Tuesday, April 21, 2009 6:23 PM