Connecting the speakers and subwoofer – JVC CA-NXF30 User Manual

Page 9

Advertising
background image

P

rep

ar

at

io

n

6

Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on
the rear of the main unit.

■ IMPORTANT
• Improper speaker cable connection reduces the

stereo effect and sound quality.

• The supplied left/right speakers are magnetically

shielded, but color irregularity may occur on the
TV. To prevent color irregularity, set up the
speakers following the instructions below.
(The subwoofer is not magnetically shielded.)
1. Turn off the main power of the TV before

setting up the speakers.

2. Place the speakers enough distance from the

TV so that they do not cause color irregularity
on the TV.

3. Wait for approximately 30 minutes before

turning on the main power of the TV again.

CAUTION

• The supplied speakers are manufactured

exclusively for use with the NX-F30 system. Do
not connect the supplied speakers to devices
other than the supplied main unit. Doing so may
damage the speakers.

• Do not connect external speakers together with

the supplied speakers. The change in
impedance may damage the main unit and the
speakers.

CAUTION

• The left and right speakers can be installed on a wall.
• When installing the speakers on a wall, be sure to have the speakers installed by qualified personnel.
• DO NOT install the speakers on the wall by yourself to avoid unexpected damage from them falling off the

wall due to incorrect installation or weakness in wall structure.

• Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage

to devices may result if the installed speakers interfere with daily activities.

Connecting the speakers and subwoofer

Right speaker

(rear view)

Left speaker

(rear view)

Speaker cable

Speaker cable

Speaker cable

Subwoofer

(rear view)

Main unit (rear view)

Red

Gray

Purple

Blue

White

NX-F30[U].book Page 6 Tuesday, April 21, 2009 6:23 PM

Advertising