JVC CA-NXF30 - Manual (Page 20)

17
Lis
te
n
ing t
o
F
M
r
a
dio
Presetting radio stations in the main unit allows
you to easily tune in to a radio station.
You can store up to 30 FM radio stations.
1
Select a radio station you want to
store.
• Refer to “Selecting an FM radio station” on
page 16.
2
Press [ENTER].
• “--” flashes in the display window for
approximately 5 seconds.
3
While “--” is flashing, press the
number buttons to select the
preset number you want to assign.
• You can also select the preset number by
pressing [PRESET ] or [PRESET ].
4
Press [ENTER] while the selected
number is flashing.
• “STORED” appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset
number to which another radio station has
previously been stored, the newly set radio
station replaces the previously stored radio
station.
■When an FM radio is selected as the source
Press the number buttons to select
the preset number of the radio station
to which you want to tune in.
• You can also select the preset number by
pressing [PRESET ] or [PRESET ].
Tuning in to a preset FM
radio station
Presetting FM stations
Tuning in to a preset radio station
Listening to FM radio (continued)
For the locations of the remote
control buttons, refer to page 16.
NX-F30[U].book Page 17 Tuesday, April 21, 2009 6:23 PM