JVC CA-NXF30 - Manual (Page 45)

42
En
jo
y
in
g
kar
ao
ke
• When a microphone is connected, the
microphone mixing function is automatically
activated.
Display window
NOTE
• If you prefer not to use the echo function, you
can cancel it (page 44).
4
Start playback of the desired
source.
• You can select a radio broadcast (page 16),
a loaded disc (page 19), a USB device
(page 20) or other connected external
devices (page 18).
5
Press [VOL +] or [VOL –]
repeatedly to adjust the overall
sound volume.
• You can also adjust the volume by turning
the [VOLUME] control on the main unit.
6
Press [MIC VOLUME +] or [MIC
VOLUME –] repeatedly to adjust
the microphone volume.
• Sing into the microphone to find the desired
microphone volume.
• Adjustable volume range is from 0 to 15.
NOTE
• Pressing [MIC VOLUME +] or [MIC VOLUME –]
on the remote control affects the volumes of both
microphones connected to the [MIC 1] and
[MIC 2] terminals on the main unit.
• When the microphone mixing function is
activated, the surround mode setting has no
effect. (Refer to page 13.)
• When the microphone mixing function is
activated, you cannot record sound from a CD to
a USB device, delete a track/group from a USB
device or add a title to a track/group on a USB
device. (Refer to pages 48 to 52.)
• While recording sound from a CD to a USB
device, deleting a track/group from a USB
device or adding a title to a track/group on a
USB device, you cannot activate the microphone
mixing function.
• You cannot record your singing to a USB device.
• Microphone audio cannot be output to an external
device connected to the [DIGITAL OUT] terminal.
• If you activate or deactivate the microphone
mixing function while the microphone is
connected, the sound becomes intermittent.
CAUTION
• Before disconnecting a microphone from the
main unit, press [MIC VOLUME –] on the remote
control until “MIC: 0” appears in the display
window.
Press [MIC MIX] to select “MIC MIX” or
“MIC OFF” in the display window.
Display window
NOTE
• If you turn off the main unit and turn it on again
when a microphone is connected, the
microphone mixing function is deactivated. To
activate the microphone, press [MIC MIX] to
select “MIC MIX” in the display window.
• When the “SCORING” indicator lights up in the
display window, you cannot deactivate the
microphone mixing function. To cancel the
scoring function, refer to page 45.
These indicators light up
when the microphone mixing
function is activated.
Activating/deactivating the
microphone mixing function
NX-F30[U].book Page 42 Tuesday, April 21, 2009 6:23 PM