JVC CA-NXF30 - Manual (Page 27)

Ba
si
c ope
ra
tions
of dis
c/
fi
le
pla
y
ba
ck
24
■When a file is played back
■When a file is stopped
When a DVD VIDEO or a USB device is selected
as the source, the messages shown below are
displayed on the TV screen to indicate the status
of the DVD VIDEO or USB device.
JPEG file
File number File type
[DISPLAY] is pressed.
File number Group number
File number File type
[DISPLAY] is pressed.
File type
Messages on the TV screen
NOW READING:
Appears when the main unit is reading the disc/
file information. Wait for a short time.
REGION CODE ERROR!:
Appears when the region code of the disc does
not match the code supported by the main unit.
(Refer to page 60.)
NO DISC:
Appears when no disc is loaded.
NO USB DEVICE:
Appears when a USB device is not connected.
OPEN:
Appears when the disc tray is opening.
CLOSE:
Appears when the disc tray is closing.
CANNOT PLAY THIS DISC:
Appears when attempting to play back an
unplayable disc.
CANNOT PLAY THIS DEVICE:
Appears when there are no playable files on a
USB device.
For the locations of the remote
control buttons, refer to page 19.
NX-F30[U].book Page 24 Tuesday, April 21, 2009 6:23 PM