JL Audio MCS-3800 - Manual (Page 44)

44
Grand Masters Require Grand Master On Switch
The Grand Master feature is designed in such a way to permit
you to turn the grand master feature on and off with a single
button press. This allows you to use the fader individually or as
a Grand Master.
To use the Grand Master feature, you also assign one button (F,
M, W) to be the "Grand Master On/Off" switch.
This switch must be on for the designated Grand Master fader
to act as a Grand Master.
When the Grand Master switch is off, the designated Grand
Master fader simply operates as an individual fader.
Grand Masters Traverse All Banks.
When the Grand Master is moved, all faders move and data is
sent out for all the faders in all the Banks.
53
Editable Parameters for Transport and M Buttons
Name
Press the Cancel/Clear key in the Keypad to clear the name.
Use the Cursor buttons to the left of the LCD to move the
cursor. Turn the first encoder to dial in the letters and numbers.
The top row of the LCD show the control's real (permanent)
name.
The bottom row of the LCD is the user editable name.
Command
The Transports and the M Buttons have a similar menu of
commands.
The only difference is that the M Buttons can also be assigned
to act as Machine Enable / Disable buttons.
From the Factory, the Transports are set to their standard
functions, that is, Play is programmed to send Play (MMC or 9
Pin.). You would need to edit this if you want play to send, for
example, a Controller command.
From the Factory, the M Buttons 1 through 4 are set to MMC
Enable Machines 1 through 4.
M5 is set to enable CS-10 Emulation.
The Command Menu is on the following page.