JL Audio MCS-3800 - Manual (Page 5)

5
The Mixer Section.................................................. 27
This chapter discusses how to assign and use the motorized,
touch sensitive faders, their associated channel switches above
the faders, select buttons and rotary encoders, Page and Bank
buttons.
Attributes of the Mixer Section ................................ 27
Basic Bank Switching and Encoder Selection ... 28
Fader Output and Input ..................................... 29
Touch Sensors .................................................... 29
Channel Switches ............................................... 30
Encoders, Select, and Page ................................ 31
Assigning Mixer Controls, and Overview ............... 32
To Assign Faders and Touch Sensors ..................... 33
Editable Parameters of Faders and Touch .............. 34
To Assign the Rotary Encoders ............................... 36
Editable Parameters of Rotary Encoders ................. 37
To Assign Mute, Solo, Aux, and Sel ........................ 38
Editable Parameters of Mute, Solo, Aux, and Sel .... 39
Mixer Operation Notes ........................................... 41
The Transport Section........................................... 47
This chapter discusses how to use the Transport controls, Jog
and Shuttle, the Machine Enable (“M”) buttons, and the Keypad
Locate Mode.
Attributes of Transport Section................................ 47
M Buttons ........................................................... 48
Transports .......................................................... 49
Jog Wheel and Shuttle Ring ............................... 49
Locates ............................................................... 50
Assigning Transport Controls, and Overview ......... 51
Editable Parameters for Transport and M Buttons .. 53
Command Types...................................................... 54
Transport Operation ................................................ 57
Jog / Shuttle Operation............................................ 59
Jog / Shuttle Speed .................................................. 61
Locate Operation ..................................................... 62
92
Quick Operation Reference
Editable Parameters
Name
Press the Cancel/Clear key in the Keypad to clear the name.
Use the Cursor buttons to the left of the LCD to move the
cursor. Turn the first encoder to dial in the letters and numbers.
The top row of the LCD show the control's real (permanent)
name. The bottom row of the LCD is the user editable name.
Command Types
Any Control can be turned off, so no command is sent.
Faders and Touch Sensors send either Controllers or Notes.
The Channel Buttons above the faders send Controllers, Notes,
or put the unit into Query Mode.
The F, W, M, Cursor, and Transport Buttons can be set to:
• Off (that is, sends no command)
• Note
• Ctrl (Controller)
• P Change (Program Change)
• Query (Puts MCS Controller nto Query Mode.)
• Jog (Turns Jog /Shuttle Wheel On and Off)
• GMaster (Turns Grand Master Fader On and Off)
• Play (MMC and or 9 Pin Play)
• Stop (MMC and or 9 Pin Stop )
• REW (MMC and or 9 Pin Rewind)
• FF (MMC and or 9 Pin Fast Forward)
• REC (MMC and or 9 Pin Record)
• RTZ (MMC and or 9 Pin Return to Zero)
• SLOPLAY (MMC and or 9 Pin 1/2 speed play)
• RV PLAY (MMC and or 9 Pin Reverse Play)
• EJECT (MMC EJECT)
• CHASE (Puts MMC or 9 Pin machine into Chase Mode.)
The M Buttons Command Menu Also Includes
• MMC (that is, turn MMC Commands on or off)
• CS-10 (that is, turn CS-10 Emulation on or off.)