SpectronIQ PD-1100 - Manual (Page 28)

16
Operating the Player
Turning the Player On and Off
Once the player is connected to a power
outlet, turn the player on and off by
pressing the STANDBY button on the
player or remote.
Inserting a Disc
The receptacle for DVDs and CDs is
located directly beneath the screen.
To insert a disc:
1. Press the OPEN/CLOSE button to open
the receptacle.
2. Insert the disc, blank side down.
3. Press the OPEN/CLOSE button to close
the receptacle. The player will begin to
play the disc.
Adjusting the Volume
Use the VOL + and VOL – buttons on the
remote to adjust the volume.
Bringing Up the On-Screen Display
The On-Screen Display (OSD) gives
information about the current disc and
playback. To bring up the OSD, press the
DISPLAY button on the remote.
Accessing the Setup Menu
The Setup menu allows you to configure
the operation of the player. You can
change video, audio, and language
settings, control access to mature
programming, and configure other
general display behavior. See
“Configuring the Player” on page 58 for
more information. To access the Setup
menu, press the SETUP button on the
remote.
OMPD800.book Page 16 Thursday, September 21, 2006 1:39 PM