SpectronIQ PD-1100 - Manual (Page 42)

Playing DVDs
30
To search to a time:
1. Press TIME twice to bring up the time
search display.
2. Enter the desired time using the
keypad.
3. Press ENTER to navigate to the selected
time.
To exit the search display without going
to a location, press TIME a third time.
0 1 / 0 2
Repeating Chapters
Press REPEAT to cycle through the repeat
options: the current chapter, the current
title, the current disc, and off.
Repeating an Arbitrary Section
You can repeat an arbitrary section of
video using the A-B button.
To repeat an arbitrary selection:
1. Press A-B to mark the beginning of the
section to be repeated.
2. Press A-B again to mark the end of the
section.
The section will begin repeating and will
continue until you press the A-B button
again.
Programming Playback Order
Using the PROG button, you can program
a sequence of up to 20 tracks.
To program a playback sequence:
1. Press PROG to bring up the program
display.
2. Select a slot using the arrow buttons.
3. Press twice to move to the Title
column.
4. Select the desired title and press the
button to move to the Chapter column.
5. Select the chapter to be scheduled in
the selected slot and press ENTER.
6. Repeat steps 3–6 until the sequence is
fully programmed.
: SELECT : PLAY
PROGRAM TITLE CHAPTER
1. __–__
2. __–__
3. __–__
4. __–__
5. __–__ 01
02
03 01
02
03
04
05
OMPD800.book Page 30 Thursday, September 21, 2006 1:39 PM