Sharp UX-600M - Manual (Page 60)

UX600MU-BOVC RT <P=001>
or
SPEAKER
Ch
ap
te
r
6
Making
Telephone Calls
Your fax can be used like a regular telephone to make and receive voice calls.
♦
To make or receive a phone call, the power must be on.
♦
The fax may interrupt a voice call received on an extension phone if there
is a period of silence during the conversation, the fax’s reception mode is
set to AUTO, and Option Setting 9 (TAD CONNECTED) is set to YES. If
you are on a touch-tone extension phone, you can prevent this by pressing
any three keys on the phone immediately after you answer. (Note: Do not
enter the code to activate fax reception: "5", "
*", and "*".)
1
Pick up the handset or press the
SPEAKER key. Listen for the dial tone.
2
Dial the number using one of the follow-
ing methods:
•
Normal Dialing: Enter the full tele-
phone number with the numeric keys.
•
Rapid Key Dialing: Press the appro-
priate Rapid Key (if the Rapid Key
number is from 20 to 38, press the
SHIFT key first).
•
Speed Dialing: Press the SPEED
DIAL key, and enter the 2-digit Speed
Dial number with the numeric keys.
3
Speak with the other party when they an-
swer.
•
If you pressed the SPEAKER key,
pick up the handset to talk.
Note: While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other party.
1 2 3
4 5 6
7 8 9
0
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
48