Siemens SX66 - Manual (Page 114)

SX66 Phone User Manual 114 SX66 Phone User Manual 115
your PC is the same as the COM port setting used for Bluetooth on your PC.
4. Follow the Bluetooth Browser screen, select the PC you want to synchronize with, tap
Next .
5. Under Serial Port Selection , select the name of the serial port for the PC selected above,
tap Next , and Finish .
Connecting to a remote PC
Dial-up Networking (DUN) allows you to connect to a remote computer via a phone line.
Once connected, you can browse the Internet or check your E-mail. The remote Bluetooth
device that will provide the Dial-up Networking service must have access to a telephone
system (either a hard-wired or mobile connection). Devices that might provide the Dial-up
Networking service include:
n Bluetooth-enabled cellular telephones.
n Bluetooth-enabled desktop computers that are attached to a telephone system.
n Bluetooth modems.
The remote computer to which you are connecting must also be attached to the phone
system and capable of answering a call.
Using Dial-up Networking:
1. From the Today screen > the Bluetooth icon > Bluetooth Manager .
2. Tap New > Connect to a network > Next .
3. Follow the connection wizard instructions.
After you create the Dial-up Networking shortcut with a device, tap and hold the shortcut
icon in the My Shortcuts tab of the Bluetooth Manager , and tap Connect .
4. Tap New Connection > OK .
5. Enter a name for the connection in the Connection Name field.
6. Enter a phone number. You may need to enter the country code and area code, depending
on where you are calling.
7. Tap OK to begin dialing.
To make this connection the default dial-up connection for Pocket Internet Explorer when
using Bluetooth modem, you still need to complete the following steps:
1. From the Today screen, tap the Start menu > Settings > the Connections tab.
2. Tap the Connections icon > the Advanced tab > Select Networks .
3. Enable Bluetooth Settings from the drop-down list.