Settings on your sx66 phone, Connecting via usb port – Siemens SX66 User Manual
Page 118
SX66 Phone User Manual
118
SX66 Phone User Manual
119
Settings on your SX66 Phone
You need to complete these actions before you start using the
Wireless Modem
on your
SX66 Phone:
n
A
GPRS SIM
card is inserted in your SX66 Phone.
n
Disable the
ActiveSync
com port connection of your PC.
n
Disable the
Infrared
function by tapping the
Start
menu
>
Settings
>
the
Connections
tab
>
Beam
.
Uncheck
Receive all incoming beams
.
n
Insert your SX66 Phone to your PC/Notebook by
Serial connection
(using the optional
serial sync cable).
1. Tap the
Start
menu
>
Programs
>
Wireless Modem
.
2. Select the
Serial
connection type from the drop-down list and insert the synchronization
cable adapter.
3. Make sure that you have connected your device with a serial sync cable if you choose
Serial
connection to a notebook or PC, tap
Start
.
Now you can start to dial the new dial-up connection you have created by tapping
Start
>
Settings
>
the
Control Panel
>
Network and Dial-up Connections
on your PC.
Connecting via USB Port
As with the connection via
serial
or
IrDA
, you need to check the following below before you
start using the
Wireless Modem
on your SX66 Phone via
USB
connection:
n
A
GPRS SIM
card is inserted in your SX66 Phone.
n
Disable the
ActiveSync
com port connection of your PC.
n
Disable the
Infrared
function by tapping the
Start
menu
>
Settings
>
the
Connections
tab
>
Beam
, and then uncheck
Receive all incoming beams
.
n
Insert your SX66 Phone to your PC
USB connection
(using the
USB
sync cable or
cradle).
Before setting up an
USB
modem, you must verify that you have the two files,
USBMDM
and
USBModem_Dialer
, on the
SX66 Phone Companion CD
. Insert the
Companion CD
into the CD-Rom of your PC and perform the settings as follows:
1.
Tap the
Start
menu
>
Programs
>
Wireless Modem
.
2. Select the
USB
connection type from the drop-down list and insert the
USB
cable
adapter.
3. Tap the
Start
button on the
Wireless Modem
screen of your SX66 Phone.
4. A
Found New Hardware
message will pop up on your desktop PC.