Siemens SX66 - Manual (Page 63)

SX66 User Manual 62
SX66 User Manual 63
Checking your connection
By default, your SX66 will automatically connect to your service provider’s network once you
have inserted a SIM card and entered the required PIN code. The icon indicates that
you are connected to your service provider's network. A full strength signal is indicated by
. As the strength of the signal diminishes, so will the number of vertical bars in the icon,
with no bars indicating no signal.
LEGAL NOTICE: In many countries you are required by law to turn off your phone on board
an aircraft. Turning off the power of your SX66 doesn't turn off the phone function. You must
turn on the Flight Mode in order to disconnect the connection to the wireless network.
Turning on the Flight Mode
To turn OFF your wireless connection to your operator’s network, you can switch your phone
connection mode to Flight mode . You can turn the Flight Mode On or Off while keeping
your SX66 turned ON.
1. While using any program on your SX66, tap in the title bar at the top of the phone’s
display.
2. Tap the Turn on flight mode or Turn off flight mode option in the pop-up dialog box.
3. Select the Turn off flight mode to receive calls.
You can use any programs on your device during a call. To quickly switch back to the Phone
Dialer Screen , tap , or tap the Start menu > Phone .
Adjusting the phone volume:
1. During a call, tap or press the volume buttons on the side of your device.
2. You can select to adjust the phone volume (ring) or device volume (notification
levels and MP3) on the pop-up menu.
3. If you select Vibrate mode, will appear in the title bar at the top of the phone
display.
4. Turn off the volume by choosing the Off option.