Siemens SX66 - Manual (Page 83)

SX66 User Manual 82 SX66 User Manual 83
By default your device detects incoming infrared (IR) and Bluetooth beams and prompts you
to accept them. If you do not want your SX66 to detect or receive beams, clear the Receive
all incoming beams check box.
NOTE: If someone attempts to send you an IR beam from an older device, you may not
be prompted to accept it. In this case, before the beam is sent from the other device, tap
Receive an infrared beam at the bottom of the Beam screen.
Bluetooth:
1. Make sure that your SX66 is configured to receive incoming beams.
2. Make sure that your SX66 is turned on, discoverable, and within 10 meters (about 30 feet)
of the other device beaming the information.
3. When prompted to receive an incoming beam, tap Yes to accept the beam.
For more information about Bluetooth and its settings, please se e Chapter 6.
4.4 ActiveSync Errors
Whenever ActiveSync cannot successfully synchronize your information, it displays an
error on your SX66.
Viewing error information
Press the Action button when the error text is displayed. ActiveSync will then display more
information about the error that occurred.
Some types of errors can interfere with automatic synchronization. If you suspect that a
scheduled automatic synchronization has not occurred, you should attempt to manually
synchronize your information. Successfully completing manual synchronization will reset
automatic synchronization. For more information, see the Synchronizing Information sec-
tion of ActiveSync Help on your PC.