Siemens SX66 - Manual (Page 42)

SX66 User Manual 42 SX66 User Manual 43
Recharging your device
You can recharge your device in the following ways:
1. Place your SX66 in the cradle and connect
it to an external power source with the travel
charger. Before using your SX66 for the
first time, charge the battery for at least 8
hours. Place it in the cradle for a short time
each day to recharge the battery to its full
capacity.
2. Connect the travel charger into the optional
USB cable plug. Connect your SX66 directly
to an external power source.
3. Plug the travel charger into the optional
DC connector converter. Connect the
Travel charger of your SX66 directly to an
external power source without using the
cradle.
4. If you have a spare battery for your SX66,
you can also put it into the cradle slot to
recharge.
Connect to the
sync connector of
your SX66
Connect to
the Travel
charger
Put a spare
battery into
the slot to
recharge
Connect to your
SX66's Sync
connector
Plug the Travel
charger into an
electrical outlet
Connect the USB
synchronization
cable to your PC
Connect the Travel
charger plug to the
USB cable plug