Siemens SX66 - Manual (Page 45)

SX66 User Manual 44 SX66 User Manual 45
2.1 Starting Up
Screen tapping and calibration
When you first start up your SX66, you will be asked to calibrate
the screen by tapping the center of a cross with your stylus as it
moves around the screen. This process ensures that when you
tap the screen with your stylus, the tapped item is activated.
Re-calibrate the screen
If your device does not accurately respond to screen taps, you
will need to re-calibrate it:
1. Tap the Start menu > Settings > the System tab >
Screen .
2. Tap the Align Screen button on the General tab to re-
calibrate the screen as described above.
When aligning the touch screen, tap the target firmly and ac-
curately.
Screen Orientation
To switch the orientation of your touch screen between the
Portrait mode or the Landscape mode, select the Orientation
options by tapping the Start menu > Settings > the System tab
> Screen . The Portrait mode allows you to get a better view
or a better operation of certain programs on your SX66, while
Landscape may be optimal for viewing longer text files.
For easier reading of text in programs that support ClearType ,
tap the ClearType tab, and then select Enable ClearType .
To increase readability or see more content by adjusting the size
of text in programs that support it, tap the Text Size tab. Move
the slider to make text larger or smaller.
Landscape Mode
Portrait Mode