Siemens SX66 - Manual (Page 147)

SX66 User Manual 146 SX66 User Manual 147
Changing the display name of your MIDlets
You can change the displayed name of any MIDlet on your SX66. However, you cannot
change the names of MIDlet suites.
1. Tap and hold the MIDlet you wish to change the name of and the then select Rename from
the pop-up menu.
2. Enter the new name for your MIDlet in the dialogue box and press OK to confirm, or Cancel
to abort.
Un-installing MIDlets/MIDlet suites
You can remove MIDlets/MIDlet suites from your SX66’s memory. To do this, ensure that
the MIDlets/MIDlet suite is not running.
1. Select the MIDlets/MIDlet suite in the MIDlet Manager window and choose Un-install .
2. You will be asked to confirm your decision by selecting the OK option. The MIDlet is then
erased from your SX66’s memory.
You cannot un-install a single MIDlet from a MIDlet suite. You must un-install the complete
MIDlet suite.
To assign a group to a MIDlets/MIDlet suite
1. Tap and hold on a MIDlet you wish and choose Group from the pop up menu in the MIDlet
Manager window.
2. The MIDlet Manager window contains a drop down box with a list of group names. Choose
one of these and tap OK .
You can adapt existing groups to meet your needs. Once a MIDlet has been assigned to a
group, that group’s name will appear on the Show menu, and you can choose any group
and view the MIDlets in it.
System Info
You can see the information about the currently used space of the MIDlets/MIDlet suite
you have selected by tapping Menu > System Info . If the manufacturer has limited the
total storage space for MIDlets, the limit and the amount currently available is also shown.