Servis-Rhino 2160 - Manual (Page 101)

OPERATION
2160 02/10 Operation Section 4-3
© 2010 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
HYDRAULIC BOOM ROTARY CUTTER
Width of Cut 60”
Cutting Height (Min.) 1-3/4”
Cutting Capacity (Max) 2”
Tractor Requirements 100 HP
Hitch Type CAT II-III Q.H.
Overall Width (Head) 69”
Overall Length (Head) 71-3/8”
Transport Width 113”
Driveline CAT 4
Oil Reservoir Capacity 55 Gallons
Blade Tip Speed (FPM) 20,028 FPM
Blade Rotation Clockwise
Blade Carrier Type Pan
Maximum Reach
Horizontal
21’
Vertical 22’, 6”
Down 11’, 6”
Max. Operating Pressure 3000 PSI
Hydraulic Breakaway Standard
Breakaway Pressure 2750 PSI
Range of Head Movement 190 degrees
Deck Thickness 10 Ga.
Side Skirts 1/4” x 9-1/4”
Safety Deflectors Standard
Replaceable Skid Shoes Standard
Weight (Approximate) 2700 lbs. with Oil
EXTRA EQUIPMENT OPTIONAL EQUIPMENT
Hydraulic Relief Arm Kit 540 or 1000 RPM
(For Non-Quick Hitch Tractor) Electro-Hydraulic Cylinder Control Valve Kit
Hyd. Valve Kit for Direct Connect (Tractors with
4-Spool Hyd. Systems)
Operator Protective Cage (Required for use with
all non-cab tractors)
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)