Servis-Rhino 2160 - Manual (Page 84)

ASSEMBLY
2160 02/10 Assembly Section 3-2
© 2010 Alamo Group Inc.
ASSEMBL
Y
TRACTOR PREPARATION
1. Move left rear tire out so that it is 50 inches minimum from the outside of left rear tire to the center of trac-
tor. Then move the right rear tire out so that it is 96 inches minimum between the outside of the left and
right rear tires. Refer to your tractor’s Operator’s Manual for instructions on Rear Wheel Adjustment for
your particular tire. Asm-B-0029. Install fluid ballast inn left rear tire as needed for stability. Check tractor
manual for recommended procedure and limits.
2. Extend front wheels out so that it is 55" inches between the inside of the tires. Asm-B-0030.
Never operate the tractor with a loose wheel rim or disc. Always tighten nuts to the specified
torque and at the recommended intervals.
3. Install 00749117 Safety Decal on left fender or elsewhere clearly in operator’s view.