Servis-Rhino 2160 - Manual (Page 126)

OPERATION
2160 02/10 Operation Section 4-28
© 2010 Alamo Group Inc.
OPERA
T
ION
The mower valve comes with a push-pull operator switch that, when properly installed, will prevent the tractor
from starting if the switch is in the ON position (pulled out). To properly install the push-pull operator, follow the
wiring diagram shown. Failure to properly install this switch could result in injury to the operator or bystander.
Become familiar with the Arm Movements by actuating the cylinder one at a time. For the electro hydraulic
option Select and Depress the Button on the handle corresponding to the correct cylinder. Slowly actuate the
Remote hydraulic Handle of the Tractor and observe proper operation of the Boom. To Select another cylinder
return the Remote Handle to the Neutral position, select and depress a different Button and then actuate the
Remote Handle once again. Before attempting to operate this equipment, read these instructions completely. If
you have any questions concerning safety of operation, contact your dealer or Rhino.
Operate the Tractor and/or Implement controls only while properly seated in the Tractor seat
with the seat belt securely fastened around you. Inadvertent movement of the Tractor or
Implement may cause serious injury or death.
(SG-29)