Servis-Rhino 2160 - Manual (Page 141)

MAINTENANCE
2160 02/10 Maintenance Section 5-3
© 2010 Alamo Group Inc.
MAINTENANCE
DRIVELINE LUBRICATION
Grease Fittings are located on the Cross Assembly of each U-Joint and on the telescoping tubes. Grease the
U-Joint after each 8 hours of use. Mnt-0024. Do not force grease through the Needle Cup Assemblies. Grease
the telescoping tubes after every 8 hours use. Some PTO-to-Hitch connections may necessitate cutting a hole
in the shields to be able to align the Grease Fitting holes for lubrication. Lubricate the shield bearings every 16
hours.
U-JOINT LUBRICATION